In Gage Threadcheck's Official Blog

Go to Threadcheck

Vickers Hardness Testing

Vickers Hardness Testing

In the Vickers hardness test, a diamond pyramid indenter with a 136° angle between oppo- site faces is pressed into the specimen under a test force F (kgf). The hardness number (HV) is obtained by dividing F by the area, A (mm2), of contact between the indenter and specimen. This area is calculated from the diagnonal length, d (mm), of the indention when the indenter is removed.

The Vickers hardness test is the most versatile hardness testing method of those that use different load settings. The Micro-Vickers hardness test, which accepts load settings of 1 kgf (9.807N) or less, is especially well suited for industrial production today, where accuracy requirements are increasing due to technology improvements. Vickers hardness testing at loads 1 Kilogram and up is also known as heavy loead Vickers or Macro Vickers. The other testing parameters are similar to lighter load vickers testing. This type of testing may be used to meet the requirements of international specifications or to replace Rockwell testing.

Comments (0) Trackbacks (0)

Sorry, the comment form is closed at this time.

Trackbacks are disabled.