In Gage Threadcheck's Official Blog

Go to Threadcheck
23Jun/16Off

New Thread Check Catalog

Thread Check Inc., is proud to announce the release of our 2016 Precision Gage Solutions catalog with over 180 pages of precision gages, measuring instruments and technical information. Our new catalog is available for download or in an electronic book format for easy use. The new catalog has links to www.threadcheck.com where our customers can shop on line, request quotes and view hundreds of technical articles. Use the table of contents to quickly turn to the product selection of your choice. Use electronic book marks for the pages you visit frequently. The new electronic catalog works across all platforms including tables and smart phones.

http://user-CfZTcuf.cld.bz/Thread-Check-Inc-Catalog-2016

Thread Check Catalog 2016 Cover

 

 

14Oct/13Off

Thread Gaging Product acceptability

System 21

System 21 specifies for interchangeable assembly with reference to functional size only. System 21 specifies that functional size must be measured at the maximum material limit within the length of standard gaging elements. System 21 requires that the NO GO functional diameter must also be verified. This can be accomplished by using a fixed limit gage such as a GO/ NO GO thread plug gage or a variable gage with functional elements such as thread rolls

System 21A

Metric threads per ANSI B1.18M

System 21A specifies for interchangeable assembly with functional size verified at the maximum material limit using standard length gaging elements. This can be performed by using fixed limit gaging such as GO/NOGO thread plug gages or with variable gaging through the use of functional elements. System 21A also requires that the minimum pitch diameter (minimum material limit) be verified by inspecting two thread flank location over the length of the thread. This can be performed with a variable gage or a thread roll snap gage with pitch diameter elements.

System 22

System 22 specifies for interchangeable assembly with functional size verified at the maximum material limit using standard length gaging elements. This can be performed by utilizing fixed limit GO/NOGO gaging or variable gaging with functional diameter elements. In addition System 22 requires the verification of the minimum pitch diameter (minimum material limit) over the full length of the thread. This can be performed by using variable gaging such as pitch diameter elements.

System 23

System 23 specifies for interchangeable assembly with functional size verified at the maximum material limit using standard length gaging elements. Minimum pitch diameter (minimum material limit)  must be verified over the full length of the thread. System 23 includes all the requirements of System 22 as well as the independent verification of lead, flank angle, taper and roundness.

www.threadcheck.com
https://www.threadcheck.com/thread-gages-gauges/
https://www.threadcheck.com/tri-roll-thread-comparator/
https://www.threadcheck.com/gagemaker-thread-gages/

info@threadcheck.com
631 231 1515
800 767 7633

1Feb/13Off

API Tapered Thread Engineering Software

API Tapered Thread software

If you are looking for API dimensional specification in one convenient package, the Gagemaker TDWIN Taper Software program is your answer. Gagemaker's TDWIN Taper software program provides all the necessary API specifications that control connection quality.  TDWIN Taper produces dimensional drawings and inspection data for API downhole tubular connectors based on the latest industry standards. All the necessary details to machine, inspect and document tubular connection threads are available in one indispensable program.

TDWIN Taper Software includes information for both preferred and non-preferred Rotary Shouldered Connections, Tubing and Casing Connections, and any combination of Crossover. The program provides standard connection types and sizes. It displays detailed connection drawings, inspection gage information, and setup and inspection reports.

The software displays dimensional drawings suitable for manufacturing. Both Pin and Box drawings can be printed.  The drawings comply with ASME Y14.5 standards for industry compatibility. The TDWIN Taper Software allows the user to print gage setup and inspection reports with your company logo and work order information. All reports and jobs can be saved for future reference.

Includes Connection Data for:

Rotary Shouldered Connections 

  • API Numbered Connections
  • API Regular
  • Full Hole
  • Internal Flush
  • Open Hole
  • PAC
  • Slim Hole
  • Wide Open
  • Extra Hole
  • H-90
  • Slimline H-90
  • External Flush
  • ACME Regular
  • ACME Streamline
  • Double Streamline

Tubing and Casing Connections

  • NUE Tubing
  • EUE Tubing
  • Line Pipe
  • Short Thread Casing
  • Long Thread Casing
  • USS Improved Buttress Tubing
  • Special Clearance Couplings
  • SR13 Seal Ring Groove Couplings

System Requirements 

  • Windows XP or higher
  • 1 MB RAM or more (recommended)
  • Screen resolution of 1024 X 768 minimum
  • USB 2.0 port (The program runs entirely from a flash drive.)
  • Active Internet connection
  • .Net Framework 2.0 or later installed

Features:

  • Follows API Specification 7.2, Dec. 2008, for Rotary Shouldered Connections
  • Follows API Specification 5B, Oct. 2008, for Tubing and Casing Connections
  • Presents “preferred” connections as well as interchangeable and obsolete
  • connections
  • Organizes data compatible with API and industry knowledge offered by
  • resources such as Smith, Joy, and Hughes
  • Displays Gagemaker style thread gages and gage setting information
  • Configures and prints reference drawings for manufacturing including:
    • standard pin/box/coupling
    • pin/box blanking
    • pin/box relief groove
    • box modified bore-back relief
    • special clearance couplings
    • SR grooved couplings
  • Produces gage setup reports for tubing, casing, RSC, and crossover  combinations
  • Provides inspection reports for all connection configurations selected
  • Customizes reports with your company logo
  • Saves reports to job files and recalls them for future reference
  • Provides web links to locate and purchase necessary gages and standards

Compact custom Flash Drive – Single User

17Jun/11Off

Thread Tech Software for Windows

Thread Tech complies with the following standards and specification. We are continuing to improve the program by adding more thread information and updating the standards when the standard committees make changes. Thread Tech will soon be available to purchase by download. This will be a positive change for our customers as it will eliminate shipping costs particularly for our international customers.

https://www.threadcheck.com/content/software.asp

  1. Unified inch screw threads-parts: ASME B1.1
  2. Unified inch screw threads-gages: ASME B1.2
  3. Unified inch screw threads (UNJ Thread Form): ASME B1.15
  4. Screw threads - UNJ profile, inch: AS8879D
  5. Unified inch taps: ASME B94.9
  6. S.T.I. screw thread plug gages: MIL-T-211309 / A-A-59158
  7. Metric screw threads M profile-parts: ASME B1.13M
  8. Metric screw threads M profile-gages: ASME B1.16
  9. Metric screw threads MJ profile-parts: ASME B1.21M
  10. Metric screw threads MJ profile-gages: ASME B1.22M
  11. Metric taps: ASME B94.9
  12. Buttress inch screw threads-parts and gages: ANSI B1.9
  13. NPT pipe threads: ASME B1.20.1
  14. ANPT pipe threads: SAE AS7105
  15. NPSC pipe threads: ASME B1.20.1
  16. NPTR pipe threads: ASME B1.20.1
  17. NPSM pipe threads: ASME B1.20.1
  18. NPTF pipe threads-parts: ASME B1.20.3
  19. NPTF pipe threads-gages: ASME B1.20.3
  20. Pipe threads where pressure-tight joints are not made on the threads-Parts: ISO 228-1
  21. Pipe threads where pressure-tight joints are not made on the threads-Gages: ISO 228-2
  22. Pipe threads where pressure-tight joints are made on the threads Parts: ISO 7-1
  23. Pipe threads where pressure-tight joints are made on the threads Gages: ISO 7-2
  24. Worm threads: Vogel Formula, Buckingham Formula
  25. Acme screw threads-general purpose and centralizing-parts and gages: ASME B1.5
  26. Stub acme screw threads-parts and gages: ASME B1.8
  27. ISO metric trapezoidal-parts: DIN 103 part 3
  28. SO metric trapezoidal-gages: DIN 103 part 9'
  29. Universal Screw Thread Program: EA-10/10 Berndt equation, Vogel exact equation
17Dec/10Off

ThreadTech Testimonials from the Canadian Central Gauge Laboratory

ThreadTech Software is is being used by leading gauge manufacturers and calibration facilities around the world.

"As manager of a busy calibration laboratory, I need a thread program that is comprehensive, accurate and up-to-date. ThreadTech is all of those things plus it is quick and easy to use. It has become one of my top resource tools."

- (Mrs.) Anca Suditu, Canadian Central Gauge Laboratory, Brampton, Ontario

"When designing thread gauges, I need a tool that is accurate and flexible. I have found ThreadTech not only accurate but also easy to use. It is my main tool for checking thread specifications."

-Dominic Scully, Chief Gauge Designer, Frank J Cox Sales/Hilco Gauge Manufacturing, Brampton, Canada