In Gage Threadcheck's Official Blog

Go to Threadcheck
15May/13Off

Thread Ring Gage Function

A Go thread ring gage inspects the maximum minor diameter and maximum pitch diameter size in a component part. The NoGo thread ring gage ensures that the threaded part does not exceed the minimum pitch diameter. Thread Check Inc. manufactures thread ring gages to ASME/ANSI B1.2 or B1.16M as well as many other national and international thread standards.

Thread Check Inc. can engineer and build gages for the following:

  • 60 degree threads.
  • ISO metric threads
  • 55 degree British threads
  • 29 degree Acme threads
  • 30 degree trapezoidal threads
  • standard and modified asymmetric buttress threads
  • worm threads
  • multiple start threads
  • Custom threads

Thread Check Inc.

Precision Gage Solutions

900 Marconi Avenue

Ronkonkoma, New York 11779  U.S.A.

Tel: 800 767 7633  Fax: 800 767 2034

Tel: 631 231 1515  Fax: 631 231 1625

info@threadcheck.com  www.threadcheck.com

THREADCHECKLOGO 1

 

 

ISO 9001 Certificate

Customer Satisfaction Survey

Measuring Instruments

2May/13Off

Gage Certification

Thread Check Inc offers 3 different levels of certification for all gages

1.       Certificate of Compliance (  C of C )

Is a general statement that the gages have been manufactured and are in conformance to the applicable gage specification. The Certificate of Compliance states that the gages have been manufactured and inspected by highly trained personnel and found to comply with the dimensions and tolerances specified. The Certificate of Compliance states that the primary reference standards for the gage calibration are traceable to System International (S.I.) units through the N.I.S. T - National Institute of Standards and Technology. The N.I.S.T. number referenced on this cert is being phased out by the requirements of A2LA. The Certificate of Compliance also states that the gages are inspected in compliance with MIL-STD 45662A, ISO 10012-1, and ANSI/NCSL Z540-1.

The Certificate of Conformance supplied by Thread Check Inc. conforms to the standard scope adopted by the American Measuring Tool Manufacturers Association – AMTMA. It is neither a contract nor a contractual representation.  The Certificate of Conformance states that the company’s responsibilities shall in no event nor for any cause what so ever, exceed the purchase price of the pertinent gage(s).

 

  • NO DIMENSIONAL SIZES OR TOLERANCES ARE LISTED ON THIS DOCUMENT
  • NO COMPANY INFORMATION OR GAGE PRESCRIBED SIZE IS LISTED ON THIS DOCUMENT
  • THREAD CHECK INC. PROVIDES THE CERTIFICATE OF COMPLIANCE FREE OF CHARGE.

 

2.       MANUFACTURER’S LONG FORM CALIBRATION (LFC)

Thread Check Inc. offers a manufacturing Long Form Calibration which provides all the critical gage dimensions and tolerances for the applicable standard. The Manufacturer’s Long Form Calibration demonstrates that the gages have been manufactured and inspected by highly trained personnel and found to comply with the dimensions and tolerances specified in the applicable standard. Long Form Calibration reports for thread gages list Pitch diameters, major diameters, minor diameters, lead, and angles. Long Form Calibration for Plain gages typically list measurements in 3 places. Thread Check does not provide calibration stickers on new gages.

Thread Check Inc. does not issue calibration frequencies on new gages.

Thread Check Inc. does not issue IDs or serial numbers unless specified by the customer.

Thread Check Inc. can supply a serial number at no additional charge if requested by the customer.

 

  • THERE IS AN ADDITIONAL COST FOR THIS RECORD.
  • THERE IS AN ADDITIONAL LEAD TIME INCURRED FOR PURCHASING THIS RECORD.
  • LONG FORM CALIBRATION MUST BE ORDERED WITH THE GAGES OR PRIOR TO THE GAGES BEING SHIPPED.

 

 

3.       ISO 17025 ACCREDITED CALIBRATION (ISO 17025 LFC)

Thread Check Inc. sends the gages to a third party calibration lab that is ISO 17025 accredited. The lab is ACLASS accredited. All critical dimensions are listed on the calibration cert. The laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated January 2009).

 

  • THERE IS AN ADDITIONAL COST FOR THIS RECORD.
  • THERE IS AN ADDITIONAL LEAD TIME INCURRED FOR PURCHASING THIS RECORD.
  • LONG FORM CALIBRATION MUST BE ORDERED WITH THE GAGES OR PRIOR TO THE GAGES BEING SHIPPED.